Respicefinem 512Hz Underground Pipe Locator Portable LED Display Pipe Inspection Locator for Pipeline Blocking Clogging Detection in Supply Cable Lines

Item Type: Underground Pipe Locator Working Frequency: 512HzModulation: NoneBattery: 6 x AA Batteries (Not Included)Usage Time: 4 Hours Intermittent UseSound Output: 50-1000Hz Depending on Signal StrengthOperating Temperature: -20℃ to 60℃Assembled Length: Approx. 535mm / 21.06inSensor: Separation angle sensor for peak and zero signal acquisitionWeight: Approx. 1805.00g / 63.67ozPackage List：1 x Detector1 x Detector Accessories1 x User Manual1 x Earphone1 x Aluminum CaseNote:512 has only one mode, the 'detector' mode. In detector mode, the receiver searches for signals transmitted by a small probe or camera with a built in transmitter that is wired through pipes. The detector must emit a 512Hz signal, and the receiver can determine the approximate depth of the target. First, turn on the receiver, walk around keeping the receiver at waist height, then walk towards the general direction of the transmitter while slowly sweeping the receiver backwards while pointing towards the transmitter. You will notice the signal getting stronger. As you get closer, adjust the sensitivity as needed to keep it within range. When you cannot keep the meter below full scale, switch to 'near' and continue moving towards the direction of the stronger signal. When you reaching the point where the signal seems strongest, moving in any direction will weaken it, and then you know you have found the detector directly below the antenna pole. Move to another location, search for this peak signal again, see if you always return to the same spot for confirmation. If you correctly perform each step, you should consistently find yourself right above the transmitter each time. Keep practicing until you get consistent results. The product does not include a transmitter and requires a 512Hz transmitter to be used.

• Built In Sensing Coil: The underground pipeline handheld features a built in sensing coil that receives magnetic from the pipe and generates an induced current to accurately calculate the direction and position of the transmitter
• Wide Application : This underground pipe locator is ideal for locating supply pipes cable conduits underground construction sites caves and underwater research environments delivering performance across diverse exploration scenarios
• Clear LED Screen Display: The pipe blockage includes an easy to read LED screen that provides real time monitoring data ensuring clear visibility and enhancing user experience during inspection tasks
• High Detection: Equipped with a 512Hz transmitter and a separated tilt sensor the receiver captures both and null to deliver highly accurate probe location results for efficient underground pipeline mapping
• Build: Constructed from premium ABS material this pipeline clogging locator offers robust durability and making it suitable for challenging environments including underwater measurements